BATTE Machinery China
Skype: Battemachinery    HOT LINE: +86 371 67991755      EMAIL: info@battemachinery.com
Batte melt pump > polymer melt pump for reaction kettle

polymer melt pump for reaction kettle

polymer melt pump for reaction kettle is mainly used for high temperature and high viscosity polymer melt transportation, such as resin, chemical fiber and other industries. It is generally installed in the lower part of the reactor and used as a feed pump. Or convey medium and high viscosity medium in the vacuum reactor, the large flange design of the suction port can make the high viscosity medium be sucked smoothly under vacuum conditions, and can complete the conveying and pressurization of polymer materials under vacuum reaction conditions. It can also be used to transport hot melt adhesives, asphalt, adhesives, pharmaceuticals, food, grease, fuels, oils, dyes, coatings, lubricants, and other high-viscosity materials without particulate impurities.

The Polymer Reaction Kettle pump melt discharge pump adopts herringbone gears. Compared with straight and helical teeth, the herringbone gear reduces the pulsation of the conveying medium. This is particularly beneficial for polymers. Since the material is more easily taken away from the gap between the teeth, the herringbone gear can better transport materials with high solid particle content. It also reduces the shear stress on the polymer. For highly sensitive polymers, it is very important to reduce the shear stress and temperature rise of the polymer during gear meshing. The gear pump in use can also be replaced with a herringbone gear. Only the sliding bearings and gear shafts need to be replaced.

ZB-K series polymer melt pump for reaction kettle

ZB-K series polymer melt pump for reaction kettle

  1. label    reaction kettle pump
  2. label    Electric or Oil
  3. label    Viscosity: ≤40000 Pas
  4. label    Working Temperature: ≤400°C(750°F)

ZB-K series Polymer melt pump for reaction kettle is mainly used for transporting medium or high viscosity medium out of the vacuum reaction kettle. On basis of large suction inlet flange design, the high viscosity medium is able to absorb inside under vacuum conditions. This series of polymer gear pump is primarily applicable for ABS, PS, PET, PC, SAN, PP, PE Bioploymers etc.

ZB-F series melt pump for reaction kettle

ZB-F series melt pump for reaction kettle

  1. label    reaction kettle pump
  2. label    Electric or Oil
  3. label    Viscosity: ≤40000 Pa.s
  4. label    Temperature: ≤400℃ (750℉)

The ZB-F reaction kettle pump is also called ZB-F oil heating bottom pump. It is mainly used to transport medium and high viscosity medium in the vacuum reactor. The large flange design of the suction port can make the high viscosity medium suck in smoothly under vacuum conditions. Mainly used in ABS, PS, PMMA, PBT, PT and other media. Good self-priming performance, can be applied to working conditions where the inlet is vacuum (-0.05~-0.09MPa).

Other hot melt pump

  1. ZB-D series extruding pump for polymer

    ZB-D series extruding pump for polymer

  2. ZB-H series high temperature and high pressure melt pump for blown film

    ZB-H series high temperature and high pressure melt pump for blown film

  3. ZB-R series gear melt pump for rubber extruder

    ZB-R series gear melt pump for rubber extruder

  4. ZB-K series polymer melt pump for reaction kettle

    ZB-K series polymer melt pump for reaction kettle

Inquiry

  • 1.Fill in and submit the below form;
  • 2.Fill in security code;
  • 3.Submit successful,we will contact you within 24 hours!

hot melt filter screen changer vedio

  • batte screen changer
  • batte melt pump
  • Single screw gravimetric dosing feeder
  • Multi-component loss in weight feeder
  • ZB-F series melt pump for reaction kettle
  • PLC Control System for extruder