Melt Pump
- melt pump for plastic extrusion
- Polymer Reaction Kettle pump
- gear pump rubber extruder
- melt pumps for extrusion
- melt pump for pvc extrusion
- ZB double shaft drive melt pump
- Explanation of terms for melt pump d
- ZB-X Series Chemical pump
- PID Control System for extrusion
- PLC Control System for extruder
- ZB-U series gear metering spinning p
- ZB-E series pressurized melt pump fo
- ZB-H series high temperature and hig
- ZB-R series gear melt pump for rubbe
- ZB-K series polymer melt pump for re
- ZB-D series extruding pump for polym
- ZB-F series melt pump for reaction k
- ZB-B series dosing melt pump for hig
- ZB-C series plastic melt pump extrud
Screen Changer
- recycled plastic screen changer
- slide plate screen changer
- pillar screen changer
- dual bolt screen changer
- continuous screen changer
- screen changer polymer filter
- Single plate hydraulic screen change
- plastic extrusion screen changer
- hydraulic slide-plate screen changer
- Manual control screen changer
- Double plate continuous hydraulic sc
- Automatic mesh belt continuous scree
- Double piston four screen cavities c
- Single plate double screen cavities
- Single piston double screen cavities
- Double piston four screen cavities b
- Dual Bolt double screen cavities hyd
Feeding System
- force feeder extruder
- continuous feeding system
- Liquid loss in weight feeder
- Volumetric Feeder
- Multi-component loss in weight feede
- Micro loss in weight metering feeder
- Single screw gravimetric dosing feed
- Twin screw loss in weight metering f
melt blown progress
contact us
- Batte Machinery Zhengzhou Co., Ltd.
- E-mail: info@battemachinery.com
- whatsapp: +86 158 38331071
- Tel: +86 371 67991755
- After-sales Tel: +86 371 67997677 / 67997877
- Address:No.11 Changchun Road, High-tech Zone, Zhengzhou, China.
News
- Analysis of Thermal Characteristics
- Introduction of the sealing method o
- batte melt pump manufacturers analyz
- The necessity of applying hydraulic
- The necessity of applying hydraulic
- What are the great advantages of the
- Influence of melt pump on extrusion
- How to set the network temperature o
- Introduction of non stop screen chan
- Ten steps for correct installation o
Twin screw loss in weight metering feeder
Name: Twin screw loss in weight metering feeder
Category: Feeding system
Introduction:Twin screw loss in weight metering feeder,suitable for all kinds of powder granule, pill shaped material, poor liquidity, sheet, can guarantee the use...
Manufacturer: BATTE Machinery China
info@battemachinery.com
Application of Twin screw metering feeder:
In the extrusion processing, it is common to add many material (such as color, flame retardant, glass fiber and so on) into extruder. In the process of continuous extrusion production, various material should be added to extruder continuously synchronized. And the adding speed of these materials should depend on corresponding formula, so metering feeder is necessary to control the adding speed. And one metering feeder control one material.
Loss-in-weigh feeders is suitable for plastic granules, powder, calcium carbonate, talcum powder, resin membrane powder, flour, starch and so on. Different material use different feeders.
Get more informations and price list !!!
Characteristics of Twin screw feeder:
◆ Generous and beautiful appearance: comparing with traditional feeders, Batte dose more improvements on feeders’ appearance.
◆ Small in size: easy to move, more suitable for changing and improving production process.
◆ Low noise: comparing with other feeders, noise of Batte feeders is up to perfect.
◆ Easy to clean and maintain: it’s easy to maintain in operation, meanwhile, very short maintenance time. Especially the control system, adopting the leading software and hardware, are nearly free-maintenance and long-service life.
◆ High feeding accuracy: Batte adds self-detection function when designing its feeders for more accuracy, it allows to detect attritions of parts and frequency variation timely, then revise them. So the feeder will not affect the feeding precision because a little change of the machine.
Structure of Twin screw loss in weight feeder:
Get more informations and price list !!!
Parameters of Twin screw loss in weight metering feeder:
Type | Screw specification |
Capacity (L/H) |
Driving power (kw) |
Hopper (L) (optional) |
Feeding accuracy |
BAT-MF-TS28 | 28 | 10-200 | 1.1 | 40-80 | ±0.2% |
BAT-MF-TS38 | 38 | 30-400 | 1.1 | 40-100 | ±0.2% |
BAT-MF-TS46 | 46 | 50-800 | 1.5 | 40-120 | ±0.2% |
BAT-MF-TS64 | 64 | 60-1200 | 2.2 | 40-150 | ±0.2% |
Notes: The feeding capacity and accuracy will be affected by different materials.
Parameters of Twin screw loss in weight feeder:
Type | Screw specification |
Capacity (L/H) |
Driving power (kw) |
Hopper (L) (optional) |
Feeding accuracy |
BAT-TF-TS28 | 28 | 10-200 | 1.1 | 40-80 | ±0.5% |
BAT-TF-TS38 | 38 | 30-400 | 1.1 | 40-100 | ±0.5% |
BAT-TF-TS46 | 46 | 50-800 | 1.5 | 40-120 | ±0.5% |
BAT-TF-TS64 | 64 | 60-1200 | 1.5 | 40-150 | ±0.5% |
Notes: The feeding capacity and accuracy will be affected by different materials.
Get more informations and price list !!!
Twin screw loss in weight metering feeder.pdf
Next:Single screw gravimetric dosing feeder